MID UNIT 7-9
INSPECTION
NOTE:
If excessive wear, cracks, defective or other damage is found on
any component, replace component.
OIL PAN AND DRIVESHAFT HOUSING
Inspect the oil pan and driveshaft housing.
If crack, defective or other damage is found, replace.
MOUNT
Inspect the upper mount and lower mount.
If excessively wear, corrosion or other damage is found, replace.
OIL SEAL
Inspect the oil seal.
If crack, cut or other damage is found, replace.
NOTE:
Install oil seal with lip (spring side) facing downward (driveshaft
housing side).
WATER TUBE
Inspect the water tube.
If clog is found, clean.
If crack, corrosion or other damage is found, replace.