8-10 LOWER UNIT
SHIFT CAM AND RELATED ITEMS
• Inspect the "stepped" surfaces of the shift cam for excessive
wear, chip or other damage. Replace if necessary.
• Inspect the shift rod guide for excessive wear, pit, corrosion or
stiff. Replace if necessary.
• Inspect the O-ring for wear, cuts, nicks or tears.
Replace if necessary.
• Inspect the boot for cracked or other damage.
Replace if necessary.
WATER PUMP AND RELATED ITEMS
• Inspect the impeller vanes for cuts, cracks, tears or excessive
wear. Replace if necessary.
• Inspect the pump case and the under panel for cracks, distor-
tion or corrosion. Replace if necessary.
WATER INLET HOUSING
• Inspect the housing for cracks or other damage. Replace if
necessary.
• Inspect the oil seal for wear, cuts, nicks or tears.
Replace if necessary.
Replacing oil seal
1. Extract the oil seal using the oil seal remover.
09913-50121: Oil seal remover
2. Apply the water resistant grease to the inner circumference
of the housing.
99000-25161: SUZUKI WATER RESISTANT GREASE