Cleaning & Inspection - Suzuki DF9,9 Service Manual

CLEANING & INSPECTION
Clean thoroughly with cleaning solvent and compressed air
before inspection.

Wear safety glasses when using compressed air to
expel solvent, carburetor cleaner, etc.

Do not place any rubber, plastic and non-metallic
parts in cleaning solvent, as severe damage or deteri-
oration will result.
NOTE:
Wire or small drill bits must not be used to clean carburetor ori-
fices and jet.
CARBURETOR BODY/TOP COVER
• Inspect the carburetor body and top cover. If cracks or other
damage are found on any component, replace it.
• Clean the carburetor body and top cover so that there is no
obstruction.
• Inspect the needle valve seat. Replace carburetor body if
wear, damage, or other abnormal condition.
JET, NOZZLE
• Inspect the jet and nozzle. If cracks or other damage are
found on the jet and nozzle, replace them.
• Clean the jet and nozzle thoroughly so that there is no
obstruction.
NEEDLE VALVE ASSEMBLY
Inspect the needle valve assembly.
If broken tips or wear are found on the needle valve assembly,
replace it.
FUEL SYSTEM 4-9