Reset Executed; User Program Execution Id Write; All Controller Errors Cleared - Omron NJ501-1 Series User Manual

5 Troubleshooting
Event name

Reset Executed

Meaning A reset was executed.
Source PLC Function Module
Error attributes Level
Effects User program
System-defined Variable
variables
None
Cause and Assumed cause
correction
A reset command was received.
Attached None
information
Precautions/ None
Remarks
Event name

User Program Execution ID Write

Meaning The user program execution ID was set or changed in the CPU Unit.
Source PLC Function Module
Error attributes Level
Effects User program
System-defined Variable
variables
None
Cause and Assumed cause
correction
A user with Administrator rights
changed the user program execution
ID that is set in the CPU Unit.
Attached None
information
Precautions/ None
Remarks
Event name

All Controller Errors Cleared

Meaning All current errors were cleared.
Source PLC Function Module
Error attributes Level
Effects User program
System-defined Variable
variables
None
Cause and Assumed cause
correction
The user cleared all current errors.
Attached None
information
Precautions/ None
Remarks
5-62
Source details
Information Recovery
--- Operation
Data type
---
Correction
---
Source details
Information Recovery
Continues. Operation
Data type
---
Correction
---
Source details
Information Recovery
Continues. Operation
Data type
---
Correction
---
Event code 9015 0000 hex
None Detection
timing
--- Log category
Operation is started after a reset is executed.
Name
---
Prevention
---
Event code 9016 0000 hex
None Detection
timing
--- Log category
Not affected.
Name
---
Prevention
---
Event code 9018 0000 hex
None Detection
timing
--- Log category
Clearing all errors for which the causes have been
removed.
Name
---
Prevention
---
NJ-series CPU Unit Hardware User's Manual (W500)
Commands from
user
Access
When download-
ing
Access
Commands from
user
Access