Connecting To A Connector-Terminal Block Conversion Unit; Using User-Made Cables With Connector; Available Connectors; Applicable Cable-Side Connectors - Omron NJ501-1 Series User Manual

4 Installation and Wiring
Connecting to a Connector-Terminal Block Conversion Unit or I/O
Relay Terminal
For details on using OMRON Connecting Cables equipped with special connectors to connect Basic I/O
Units with connectors to OMRON Connector-Terminal Block Conversion Units or I/O Relay Terminals,
refer to A-2-4 Connecting Connector-Terminal Block Conversion Units and I/O Relay Terminals.

Using User-made Cables with Connector

 Available Connectors
Use the following connectors when assembling a connector and cable.
CJ-series 32- and 64-point Basic I/O Units with Fujitsu Connectors
Applicable Units
Model
CJ1W-ID231
CJ1W-ID261
CJ1W-OD231
CJ1W-OD261
CJ1W-MD261
CJ1W-MD231

Applicable Cable-side Connectors

Connection
Solder-type
Crimped
Pressure-welded
4-34
Specifications
Input Unit, 24 VDC, 32 inputs
Input Unit, 24 VDC, 64 inputs
Transistor Output Unit with Sinking Outputs, 32 outputs
Transistor Output Unit with Sinking Outputs, 64 outputs
24-VDC Input/Transistor Output Units, 32 Inputs, 32 Outputs
24-VDC Input/Transistor Output Units, 16 Inputs, 16 Outputs
Pins OMRON set
40 C500-CE404
24 C500-CE241
40 C500-CE405
24 C500-CE242
40 C500-CE403
24 C500-CE243
Fujitsu parts
Socket: FCN-361J040-AU
Connector cover: FCN-360C040-J2
Socket: FCN-361J024-AU
Connector cover: FCN-360C024-J2
Socket: FCN-363J040
Connector cover: FCN-360C040-J2
Contacts: FCN-363J-AU
Socket: FCN-363J024
Connector cover: FCN-360C024-J2
Contacts: FCN-363J-AU
FCN-367J040-AU/F
FCN-367J024-AU/F
NJ-series CPU Unit Hardware User's Manual (W500)
Pins
40
24