Clock Changed; Time Zone Changed; Variable Changed To True With Forced Refreshing - Omron NJ501-1 Series User Manual

5 Troubleshooting
Event name

Clock Changed

Meaning The clock time was changed.
Source PLC Function Module
Error attributes Level
Effects User program
System-defined Variable
variables
_CurrentTime
Cause and Assumed cause
correction
The clock time was changed.
Attached Attached information 1: Time before change
information
Precautions/ Clock changes by the Set Time instruction (SetTime) are not recorded in the event log.
Remarks
The time stamp for this event will be for the time after the change.
Event name

Time Zone Changed

Meaning The time zone was changed.
Source PLC Function Module
Error attributes Level
Effects User program
System-defined Variable
variables
_CurrentTime
Cause and Assumed cause
correction
The time zone was changed.
Attached None
information
Precautions/ None
Remarks
Event name

Variable Changed to TRUE with Forced Refreshing

Meaning Changing a variable to TRUE with forced refreshing was specified.
Source PLC Function Module
Error attributes Level
Effects User program
System-defined Variable
variables
None
Cause and Assumed cause
correction
Changing a variable to TRUE with
forced refreshing was specified by the
user.
Attached None
information
Precautions/ None
Remarks
5-58
Source details
Information Recovery
Continues. Operation
Data type
DATE_AND_TIME
Correction
---
Source details
Information Recovery
Continues. Operation
Data type
DATE_AND_TIME
Correction
---
Source details
Information Recovery
Continues. Operation
Data type
---
Correction
---
Event code 9001 0000 hex
None Detection
timing
--- Log category
Not affected.
Name
System Time
Prevention
---
Event code 9002 0000 hex
None Detection
timing
--- Log category
Not affected.
Name
System Time
Prevention
---
Event code 9008 0000 hex
None Detection
timing
--- Log category
Operation is performed according to the forced refreshing
values.
Name
---
Prevention
---
NJ-series CPU Unit Hardware User's Manual (W500)
Commands from
user
Access
When download-
ing
Access
Commands from
user
Access