Connection; Connecting By Usb; Connection With Ethernet/Ip; Direct Connection - Omron NJ501-1 Series User Manual

3 Configuration Units
3-7-2

Connection

With an NJ-series CPU Unit, you can connect the Sysmac Studio online in the following ways.
Configuration
 Connecting by USB

• Direct Connection

USB
The connection device does not
need to be specified.
 Connection with EtherNet/IP
• 1:1 Connection
Sysmac Studio
EtherNet/IP
• A direct connection is made from
the Sysmac Studio. The IP
address and connection device do
not need to be specified.
• You can make the connection
whether or not a switching hub is
used.
• Support for Auto-MDI enables the
use of cross cables or straight
cables if a direct connection is
made.
3-32
• Connection to CPU Unit on EtherNet/IP with USB
Sysmac Studio
USB
Directly specify the IP address of the remote device or select the
remote device from the node list.
• 1:N Connection
Directly specify the IP address of the remote device or select the
remote device from the node list.
Sysmac Studio
EtherNet/IP
Sysmac Studio
EtherNet/IP
NJ-series CPU Unit Hardware User's Manual (W500)