Connecting To Connector-Terminal Block Conversion Units Or I/O Relay Terminals - Omron CJ1W-ID Series User Manual

4-4-5 Connecting to Connector-Terminal Block Conversion Units or I/O
Relay Terminals
OMRON Connecting Cable can be used to connect Basic I/O Units with Connectors to OMRON Con-
nector-Terminal Block Conversion Units or to OMRON I/O Relay Terminals. For details, refer to A-2-4
Connecting Connector-Terminal Block Conversion Units and I/O Relay Terminals.
 Connection Examples
Connector-Terminal Block Conversion Unit
Basic I/O Unit
Connecting Cable
40 or 60 terminals
NJ-series CPU Unit Hardware User's Manual (W500)
Connector-Terminal Block
Conversion Unit
4 Installation and Wiring
I/O Relay Terminals
Basic I/O Unit
Connecting Cable
I/O Relay Terminal
4
4-39