[Memory Rx Setting]; [Forward Tx Setting]; [Report Settings] - Olivetti d-COLOR MF652 Network Fax Operations

7

[Memory RX Setting]

To display: [Utility] - [Administrator Settings] - [Fax Settings] - [Function Settings] - [Memory RX Setting]
Configure the settings for using the Memory RX function.
Memory RX is a function to save a received fax to Memory RX User Box of this machine.
Settings
[Memory RX User Box
Password]

[Forward TX Setting]

To display: [Utility] - [Administrator Settings] - [Fax Settings] - [Function Settings] - [Forward TX Setting]
Configure the settings for using the Forward TX function.
Forward TX is a function that transfers a received fax to a pre-specified destination.
Settings
[Yes]/[No]
[Output Method]
[Forward Dest.]
[Select Line]

[Report Settings]

To display: [Utility] - [Administrator Settings] - [Fax Settings] - [Report Settings]
Specify the conditions for printing fax-related reports.
Settings
[Activity Report]
[ON]/[OFF]
[Output Setting]
7-26
Description
To use the Memory RX function, tap [No] to deselect it. In addition, specify
the password to restrict an access to the Memory RX User Box with up to
eight digits.
[No] is specified by default.
Description
Select whether to use Forward TX.
[No] is specified by default.
Select whether to print a received fax on this machine when forwarding it.
• [Forward & Print]: Prints a received fax on this machine when forward-
ing it.
• [Forward & Print (If TX Fails)]: Prints a received fax on this machine only
when forwarding has failed.
[Forward & Print (If TX Fails)] is specified by default.
Specify a destination where to forward a received fax.
Directly enter the appropriate fax number using the Keypad, or tap [Select
from Address Book] and select one of the destinations registered on this
machine.
You can specify [File Type] and convert a fax into a file except when the
destination is a fax machine.
If two lines are used, select the line used to send a fax. If [No Selection] is
selected, either line, whichever is not busy, is used for transmission.
[No Selection] is selected by default.
Description
Set the printing conditions for a report containing results of faxes sent and
received.
Specify whether to print an activity report.
[ON] is selected by default.
To print it, select when to print it.
• [Daily]: Prints an activity report at the time specified in [Output Time
Settings] every day.
• [Every 100 Comm.]: Prints an activity report every 100 communica-
tions.
• [100/ Daily]: Prints an activity report at the time specified in [Output
Time Settings] every day. In addition, a report is printed for every
100 communications.
[Every 100 Comm.] is specified by default.
d-Color MF 752/652