Digital Clock; Display Of The Second Speed; Display In Rear Centre Console; Auto Check Control - Skoda Superb Owner's Manual

Hide thumbs Also See for Superb:
Table of Contents

Advertisement

Reset trip counter for the distance driven
Press and hold the
» Fig. 2
on page 10 button.
7
Odometer
The odometer
» Fig. 6
indicates the total distance the vehicle has travelled.
B
Note
If the second speed display is enabled on vehicles with a segment display, this
speed will be shown instead of the odometer.

Digital clock

First read and observe the introductory information and safety warn-
ings
on page 10.
The clock is set with the buttons
3
Select the display that you wish to change with the button
change with the button
.
7
In vehicles equipped with the MAXI DOT display, it is also possible to set the clock
in the Time menu
» page
29.

Display of the second speed

First read and observe the introductory information and safety warn-
ings
on page 10.
The display can show the current speed in mph
This feature is provided for driving in countries with different speed units.
Maxi DOT display
The display of the second speed can be set in the menu item settings
Settings.
Segment display
Press the
» Fig. 2
on page 10 key repeatedly, until the odometer display flash-
3
es
» page
12.
Press the
key while the display flashes.
7
1)
For models with the speedometer in mph, the second speed is displayed in km/h.
and
» Fig. 2
on page 10.
7
and carry out the
3
.
1)
» page
The second speed is displayed instead of the odometer.
The display of the second speed can be disabled in the same way.

Display in rear centre console

First read and observe the introductory information and safety warn-
ings
on page 10.
The time and the outside temperature is displayed on the display in the rear cen-
tre console when the ignition is switched on
The values are taken over by the instrument cluster.

Auto Check Control

First read and observe the introductory information and safety warn-
ings
on page 10.
Vehicle condition
Certain functions and conditions of individual vehicle systems are checked contin-
uously when the ignition is switched on and also while driving.
29,
Some error messages and other information are displayed in the MAXI DOT dis-
play. The messages are displayed simultaneously with the symbols in the MAXI
DOT display or with the warning lights in the instrument cluster
Fig. 7
Centre console at rear: Display
» Fig.
7.
» page
14.
Instruments and Indicator Lights
13

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents