If menu item WPA2 is set in the Mobile phone - Wi-Fi - Settings - Encryption
menu, then the password displayed when the Wi-Fi is switched on must be en-
tered in the device to be connected. The password can be found in the Mobile
phone - Wi-Fi - Password - Show menu.
If menu item Open is set in the Mobile phone - Wi-Fi - Settings - Encryption
menu, the connection is made automatically.
Connecting using WPS (service for easy connection)
›
Switch on the Wi-Fi network
» page
›
Open the Mobile phone - Wi-Fi - WPS config. menu in the instrument cluster.
›
In the device to be connected, select the connection using WPS function - see
operating instructions for the device to be connected.
If the Pushbutton menu item is selected in the instrument cluster, the Wi-Fi con-
nection is made automatically.
If the WPS PIN menu item is selected in the instrument cluster, then a PIN must
be entered in the device to be connected and the instrument cluster.
Use WLAN network in MAXI DOT display
First read and observe the introductory information given on page 119.
When a Wi-Fi network is switched on, the following menu items are displayed
when the Wi-Fi menu item is selected.
■
Off - Switch off the WLAN network (depending on the context)
Device list - Display a list of external devices
■
Active device - Display a list of active devices
■
■
Block - Block device connections
Known devices - Display a list of known devices
■
Rename - Rename the device
■
■
Block - Block device connections
Device blocked - Display a list of blocked devices
■
Unblock - Remove the connection block
■
■
Delete lists - Delete device lists
Known devices - Delete the list of known devices
■
Device blocked - Delete the list of blocked devices
■
■
Both lists - Delete both device lists
Password - Use of password to log on to the WLAN network
■
Show - Display a password to log on to the WLAN network
■
■
Generate - Generate a new password to log on to the WLAN network
120
Using the system
119, Switching Wi-Fi network on/off.
WLAN name - Use of WLAN network name
■
Show - Display the WLAN network name
■
Rename - Rename the WLAN network
■
WPS config. - Wi-Fi network connection using WPS
■
Pushbutton - Automatic connection
■
■
WPS PIN - PIN entry for the connection
Data counter - Display information about the volume of data transferred
■
Act. Conn. - Display the volume of data transferred for the current connection
■
■
Total - Display the total volume of data transferred
Reset - Reset the information about the volume of data transferred
■
Settings - WLAN network settings
■
■
Access point - Access point settings
Settings - Access point management
■
APN - Change the access point name
■
■
User name - User Name
Password - Password
■
Reset - Reset access point factory settings
■
■
Prioritisation - Set the connection priority
Calls - Set the connection priority for calls
■
Data - Set the connection priority for data transfer
■
■
Encryption- Set the encryption
WPA2 - Enable WPA 2 encryption
■
Open - No encryption
■
■
Visibility - Set the WLAN network visibility
Visible - WLAN network is visible to other devices
■
Invisible - WLAN network is not visible to other devices
■
Data roaming - Set the data roaming
■
No roaming - Data roaming is not allowed
■
Allow - Data roaming is allowed
■
Always ask - Question setting for data roaming
■
■
WLAN channel - Select WLAN network channels (preferably set to channel 11)
Channel 1 ... Channel 11 - Display the WLAN network channels
■
Reset - Reset Wi-Fi network factory settings
■