Rear light (Superb Combi)
Fig. 208 Removing: Cover/light
Fig. 209 Seal expand / lighting connector
First read and observe the introductory information and safety warn-
ings
on page 247.
Removing
›
Open the boot lid.
›
Insert the clamp for removing the wheel trims
the hole at the position indicated by the arrow
›
Remove the cover in the direction of the arrow
›
Use the screwdriver from the tool kit to unscrew the lamp
›
Grasp the rear light and carefully remove away from the direction of travel.
›
Remove the rubber seal in the direction of arrow
›
Pull off the cable bundle with the plug cap
›
Press together the interlocks on the connector in the direction of arrow
» Fig. 209
- .
2
» page
228, Vehicle tool kit into
» Fig. 208
- .
» Fig. 208
- .
» Fig. 208
- .
» Fig. 209
- .
1
» Fig. 209
- .
›
Carefully remove the connector from the tail lamp assembly in the direction of
the arrow
.
3
Install
›
Insert the connector into the lamp and lock it securely.
›
Install the rubber seal in the body in the opposite direction to arrow
stall
» Fig. 209
- .
›
Insert the tail lamp with the holes
the body
» Fig. 209
- .
›
Carefully press the tail light into the bolts on the bodywork.
Be careful not to pinch the cable bundle between the bodywork and light.
›
Screw the tail lamp into place and install the cover.
›
Ensure that the cover engages firmly.
Replacing bulbs in rear light (Superb Combi)
First read and observe the introductory information and safety warn-
ings
on page 247.
›
Turn the bulb holder
» Fig. 210
2
ing.
›
Push the faulty bulb into the holder, turn in anti -clockwise direction up to the
stop and remove.
›
Insert a new bulb into the holder and turn in a clockwise direction to the the
stop.
›
Replace the holder with the bulb into the lamp housing and turn in a clockwise
direction to the stop.
» Fig. 210
on page 251 into the bolts on
1
Fig. 210
Replacing the light bulb
anti-clockwise remove it from the lamp hous-
Fuses and light bulbs
in-
1
251