Skoda Superb Owner's Manual page 96

Hide thumbs Also See for Superb:
Table of Contents

Advertisement

Fit and remove variable loading floor
Fixing set
Movable lashing eyes
The variable loading floor makes handling of bulky items of luggage easier.
CAUTION
The maximum permissible load of the variable loading floor is 75 kg.
Note
The space below the variable loading floor can be used for stowing objects, for
example the fastening elements, removed foldable boot cover, etc.
Partial extension of variable load floor
Fig. 95 Boot: partially pulling out the variable loading floor
First read and observe the introductory information and safety warn-
ings
on page 92.
The variable loading floor can be partially pulled out over the rear bumper.
Grasp the rear of the variable loading floor by the handle and lift gently in the
direction of the arrow
» Fig.
95.
1
Extend the variable load floor over the bumper in the direction of the arrow
until it engages in the opening
C
The variable loading floor which is pulled out in such a way is solely used as a
seat, for example for changing shoes.
.
94
To push in the rear section of the variable loading floor, grasp by the handle and
lift slightly in the direction of the arrow
94
Slide the variable load floor forward up to the stop.
95
When pulling out the variable loading floor, the front edge (close to the rear
seats) is lifted at the same time. Thus, small objects can no longer fall into the
space between the boot floor and the variable loading floor.
CAUTION
Ensure that the raised front edge of the variable loading floor is not damaged.
Divide boot
First read and observe the introductory information and safety warn-
ings
on page 92.
The boot can be divided with the variable loading floor.
Grasp the rear of the variable loading floor by the handle and lift in the direction
of the arrow
» Fig. 95
1
Insert the trailing edge in one of the openings
The variable loading floor is secured in the openings
The variable loading floor can be pulled out a little more before dividing the boot
with the variable loading floor
rear seats and the separation.
2
CAUTION
Ensure that the raised front edge of the variable loading floor is not damaged.
.
1
Fig. 96
Dividing the boot
on page 93 .
» Fig.
96.
A
against movement.
A
» page
93. This enlarges the space between the
Seats and useful equipment
93

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents