Skoda Superb Owner's Manual page 72

Note
The middle rear head restraint is adjustable in two positions.
Memory function of the electrically adjustable seat

First read and observe the introductory information and safety warn-
ings on page 66.
The memory function for the driver's seat provides the option to store the posi-
tions of the driver's seat and the external mirrors. Each of the three memory but-
tons » Fig. 53 can be assigned a set position.
B
Storing seat and exterior mirror settings for driving forward
›
Switch on the ignition.
›
Adjust the seat to the desired position.
›
Adjust both of the exterior mirrors
›
Press the button » Fig. 53.
A
SET
›
Within 10 seconds after pressing the
button .
B
An acknowledgment sound confirms the storage.
Saving front passenger mirror settings when reversing
›
Switch on the ignition.
›
Press the required memory button
›
Move the rotary knob for the exterior mirror control into position 
›
Engage reverse gear.
›
Adjust the front passenger's mirror to the desired position
1)
The vehicle must be locked and unlocked with the same key to save the seat and exterior mirror po-
sition to the key.
Fig. 53
Memory buttons and SET button
» page 65.
button, press the desired memory
SET
» Fig. 53.
B
» page
» page 65.
›
Disengage reverse gear.
The set position of the exterior mirror is stored.

Retrieving the saved setting
›
Briefly press the desired memory button
or
›
Press and hold the desired memory button
ignition is on and travelling at a speed of more than 5 km / h.
Stopping the ongoing adjustment
›
Press any button on the driver's seat or the button
key.
Note
Each time new seat and exterior mirror settings for forward travel are saved, the
individual setting for the right exterior mirror for reverse travel must also be
saved again.
Memory function of the remote control key

First read and observe the introductory information and safety warn-
ings on page 66.
The automatic storage of the driver's seat and exterior mirror positions when
locking the vehicle can be turned on in the memory of the remote control key (af-
terwards only as function of automatic storage).
Storing seat and exterior mirror settings for driving forward
›
Enable automatic storage.
When automatic storage is activated, the current positions of the driver's seat
and the external mirrors are saved in the memory of the remote control key each
time the vehicle is locked. When the vehicle is next unlocked using the same key,
the driver's seat and the external mirrors assume the positions stored in the
memory of this key 1) .
65.
Saving front passenger mirror settings when reversing
›
Unlock the vehicle with the remote control key.
» Fig. 53 with the ignition on.
B
with the ignition off or when the
B
on the remote control

Seats and useful equipment


69