Chapter 6: Special Features; Special Dialing; Dialing Through A Switchboard; Dialing An Overseas Number (With Pauses) - Canon MultiPASS F50 Fax Manual

Chapter 6
Special Features

Special Dialing

This section explains special dialing features, such as dialing through a switchboard, dialing an overseas number,
and switching temporarily to tone dialing.

Dialing Through a Switchboard

A PBX (Private Branch Exchange) is an on-site telephone switchboard. If your machine is connected through a
PBX or other telephone switching system, you have to dial the outside line access number first, and then dial the
number of the party you are calling.

Dialing an Overseas Number (With Pauses)

When you dial or register an overseas number, you may need to insert a pause within and/or after the number.
The length and location of the pause depends on the telephone system of your country.
1
Press Fax to set Fax Mode.
1 2 / 0 3 / 2 0 0 1 M O N 1 5 : 3 0
F a x T e l
Ex:
2
Prepare the document and place it on the
platen glass or load it into the ADF.
M E M O R Y U S E D
Ex:
(Currently used memory)
D O C U M E N T R E A D Y
(Standby to scan)
• If you use the platen glass, LCD displays standby
mode.
• For color sending, press Color/B&W to turn on
its light. (→ p. 4-1)
• To adjust the resolution and contrast, → p. 4-2.
3
Use the numeric buttons to dial the
international access code.
T E L =
Ex:
• If you enter the wrong number, press
Stop/Reset, then enter the correct number.
• For details on international access codes, contact
your local telephone company.
S T A N D A R D
0 %
0 0
4
If necessary, press Redial/Pause to enter
a pause.
T E L =
Ex:
• A pause entered within a number (p) is two
seconds long.
• For a longer pause, press Redial/Pause again for
another two-second pause. Alternatively, you can
change the length of the pause. (→ MID PAUSE
SET, p. 9-5)
5
Use the numeric buttons to dial the country
code, the area code, and the fax/telephone
number of the other party.
T E L =
Ex:
• If you enter the wrong number, press Stop/Reset
and start again from step 3.
6
If necessary, press Redial/Pause to enter
a pause.
T E L =
Ex:
• A pause at the end of a number (P) is fixed to ten
seconds.
0 0 P
0 0 p 8 1 1 2 3
0 0 p 8 1 1 2 3 P
6
6-1