Advertisement
Installing the lock & through-bolt trim
12
Install lock chassis and engage
retractor in latch
From the outside of the door, insert the lock chassis
into the 2 1/8" chassis hole, routing the solenoid wire
through the notch.
Caution: Make sure that the latch tube prongs engage
the chassis frame and that the latch tailpiece engages
the retractor.
13
Install fire plate
Position the fire plate on the inside of the door so that
the chassis fits through the square opening in the fire
plate, as shown in Figure 13.
Installation Instructions for 83KM/93KM–85KM/95KM IDH Max Cylindrical Locks
Installation Instructions for 83KM/93KM–85KM/95KM IDH Max Cylindrical Locks
Figure 12 Installing the lock chassis and engaging the
BEST ACCESS SYSTEMS
a Product Group of Stanley Security Solutions, Inc
Retractor
Latch tube
prong
Latch
tailpiece
Latch tube
prong
Chassis frame
Notch
Inside of door
retractor in the latch
Inside of door
Figure 13 Installing the fire plate
Chassis
Fire plate
11
Advertisement
