Barcode Connector Utility - Juniper Archer 2 Owner's Manual

6. Put the cursor where you want the barcode data to be
placed.
7. Using the red crosshairs, aim the scanner at the barcode
you are scanning. Press the target button
scanning.
8. When the scanner decodes the barcode, the data
is placed in your document. (With Excel, tap on the
column you want the data to appear in.)

Barcode Connector Utility

The Barcode Connector
program provided with the barcode scanner. Depending
on the configuration of your Archer 2 it either loads
automatically when the handheld is turned on or you can
open it from the Home screen.
Note: If the program does not appear in the Home screen
favorites bar as shown below (lower right-hand corner), tap
the Windows Start screen key
utility is a barcode wedge
™
and find it in the Start menu.
Ch 9 Barcode Scanner
to begin
79