Table of Contents
Advertisement
Navigation Options
Select the Options soft key to set, clear, or mark a waypoint,
set up a breadcrumb trail, change the units of measurement,
or turn the power on or off.
Set: Take the coordinates in the "Change" boxes and set
„
these as the new waypoint.
Clear: Clear the waypoint (goes back to the blue flag).
„
Mark: Take the current GPS coordinate and set this as the
„
new waypoint.
Units: Displays units in either feet/miles for U.S. or meters/
„
km for metric.
58
Archer 2 Rugged Handheld Owner's Manual
Hide quick links:
Advertisement
Table of Contents
Related Manuals for Juniper Archer 2
Related Products for Juniper Archer 2
- Juniper Archer
- Juniper Archer 3
- Juniper 200 Series
- Juniper ADVANCED INSIGHT SCRIPTS 2.5 - S REV 1
- Juniper MEDIA FLOW CONTROLLER 2.0.4 -
- Juniper MEDIA FLOW MANAGER 2.0.2 - ADMINISTRATOR S GUIDE AND CLI
- Juniper NETWORK AND SECURITY MANAGER 2010.3 - CONFIGURING INTRUSION DETECTION AND PREVENTION GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING INTRUSION DETECTION PREVENTION DEVICES GUIDE REV 01
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - API GUIDE REV 1
- Juniper NETWORK AND SECURITY MANAGER 2010.3 - M-SERIES AND MX-SERIES DEVICES GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.2 - ADMINISTRATION GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.3 - ADMINISTRATION GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING J SERIES SERVICES ROUTERS AND SRX SERIES SERVICES GATEWAYS GUIDE REV
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - NSMXPRESS SERIES II REV 1
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - REV1