Juniper Archer 2 Owner's Manual page 63

Nav Mode:
„
Bearing – The arrow icon and angle displayed are
referenced off of North. Position the top of the device
toward North and the arrow will point in the direction
to travel to get to the waypoint. When in this mode an
'N' is displayed before the angle.
Heading – The arrow icon and angle displayed show
the direction to travel to get to the waypoint relative
to the current direction of travel. This is a GPS Compass
and movement is needed to obtain direction
information. If movement is too slow, this data cannot
be determined and the stationary icon is displayed.
Breadcrumb: This is an independent function from
„
everything else in this gadget. Setting this logs points at
specific time intervals into the GPSTrack.gpx file.
Three files are created, 2 for waypoints and 1 for the
breadcrumbing. Waypoint information is saved in both the
GPSLoc.gpx and GPSLoc.csv. Both files contain the same
information, but in different formats. The breadcrumb data
is stored in the GPSTrack.gpx file. These files can be used in
programs like Google Earth .
™
Ch 6 GPS/GNSS
59