Table of Contents
Advertisement
4. The Home screen appears (layout varies by model).
Note: If you have a barcode, the Barcode Connector
screen is shown. Refer to Chapter 9 for details.
5. Press the power button
Charge the battery pack at room temperature (68°
F or 20° C) for 4 to 5 hours. While the battery pack is
charging, the red LED blinks. When it is fully charged, the
red LED is solid.
Install the Operating System in Other Languages
The operating system is provided in English by default. It is
also available in French, German, Spanish and Brazilian
Portuguese. You can download the operating system in one
of these languages from our website. Go to www.junipersys.
com/Archer-2/support and select Downloads, then Archer
2. Full installation instructions are also available here.
to suspend the handheld.
Ch 1 Getting Started
7
Hide quick links:
Advertisement
Table of Contents
Related Manuals for Juniper Archer 2
Related Products for Juniper Archer 2
- Juniper Archer
- Juniper Archer 3
- Juniper 200 Series
- Juniper ADVANCED INSIGHT SCRIPTS 2.5 - S REV 1
- Juniper MEDIA FLOW CONTROLLER 2.0.4 -
- Juniper MEDIA FLOW MANAGER 2.0.2 - ADMINISTRATOR S GUIDE AND CLI
- Juniper NETWORK AND SECURITY MANAGER 2010.3 - CONFIGURING INTRUSION DETECTION AND PREVENTION GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING INTRUSION DETECTION PREVENTION DEVICES GUIDE REV 01
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - API GUIDE REV 1
- Juniper NETWORK AND SECURITY MANAGER 2010.3 - M-SERIES AND MX-SERIES DEVICES GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.2 - ADMINISTRATION GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.3 - ADMINISTRATION GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING J SERIES SERVICES ROUTERS AND SRX SERIES SERVICES GATEWAYS GUIDE REV
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE REV1
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - NSMXPRESS SERIES II REV 1
- Juniper NETWORK AND SECURITY MANAGER 2010.4 - REV1