Juniper Archer 2 Owner's Manual page 55

available networks and their strengths appears on the
Wi-Fi Wireless screen.
3. Tap on the network you want to connect to. If you want
to add a new network, select Add New from the top of
the list.
4. Configuration and authentication set up screens are
shown. Depending on the network you are connecting
to, you may need to make some selections from
pull down lists and enter information like a passkey.
Some information may not be required or will appear
automatically. When you are finished with the set up
screens, press Finish.
5. Select Network Adapters from the horizontal scrolling
menu near the top of the screen. For connection
options, select The Internet or Work (for office networks).
Other settings can be modified if necessary.
6. If you selected The Internet, you can open Internet
Explorer and begin using the Internet.
Once a Wi-Fi network is set up, the icon on the Home Page
turns blue and the name of the network is shown.
The Archer 2 remembers the Wi-Fi network connections
created.
Ch 5 Wi-Fi Wireless Networking
51