Juniper Archer 2 Owner's Manual page 56

Wi-Fi Dialog Box
Whenever Wi-Fi is turned on, a dialog box might pop up at
the bottom of the screen indicating the Wi-Fi networks the
Archer 2 has located. You can select a new network without
going to the Wi-Fi control panel from this dialog box.
Tap on the screen outside of the dialog box to remove it
temporarily. You can also disable it to keep it from popping
up in the future. When this dialog box is shown, select the
Menu soft key and select Don't show this message... from
the list.
Adjusting Wi-Fi Settings
To add a new Wi-Fi network or edit settings, go to the Wi-Fi
control panel, select the Menu soft key and make desired
selections from the pull-down list.
52
Archer 2 Rugged Handheld Owner's Manual