Ieee 802.1X Authentication Setting; Setting Ieee802.1X Authentication - Toshiba 5520 Management Manual

2 SETTING ITEMS (ADMIN)

IEEE 802.1X Authentication Setting

This menu allows you to make settings for IEEE 802.1X authentication that will apply to wired networks.
This equipment supports the following authentication methods:
EAP-MD5
EAP-MSCHAPv2
EAP-TLS
PEAP
The following protocol is available for inner authentication:
- EAP-MSCHAPv2
EAP-TTLS
The following protocols are available for inner authentication:
- PAP
- CHAP
- EAP-MSCHAPv2
- EAP-MD5
The following certificates are required for each authentication method using TopAccess to enable IEEE 802.1X
authentication:
Authentication Method
EAP-MD5
EAP-MSCHAPv2
EAP-TLS
PEAP
EAP-TTLS
For instructions on how to install certificates, refer to the TopAccess Guide.
The settings for IEEE 802.1X authentication depend on the authentication method you select.

Setting IEEE802.1X authentication

1
Press [802.1X SETTING] in the ADMIN menu.
The WIRED 802.1X SETTINGS screen is displayed.
To display the ADMIN menu, see the following page:
P.63 "Entering Admin Menu"
130 IEEE 802.1X Authentication Setting
Inner Authentication Method
—
—
—
EAP-MSCHAPv2
PAP
CHAP
EAP-MD5
EAP-MSCHAPv2
CA Certificate User Certificate
—
—
Required Required
Required
Required
Required
Required
Required
—
—
—
—
—
—
—