Toshiba 5520 Management Manual page 30

1 SETTING ITEMS (USER)
For e-STUDIO5520C/6520C/6530C
The selected paper size is displayed in the drawer in the illustration.
If you want to change the paper type from plain paper to another or want to specify the use purpose of paper in
the drawer, press [PAPER TYPE] and proceed to step 3.
Selecting [AUTO (mm)] or [AUTO (inch)] allows the equipment to automatically detect the size of paper in the
drawer. To set A/B format paper such as A3 and A4, press [AUTO (mm)]. To set LT format paper such as LD
and LT, press [AUTO (inch)]. When paper is placed in the drawer, the equipment automatically detects the
paper size.
The equipment may fail to detect the paper size and indicates "UNDEF" for the drawer if the LT format paper is
placed in the drawer for which [AUTO (mm)] is set or vice versa. In this case, select the correct button.
3
Press the drawer portion in the illustration to highlight the drawer for which you want
to change the paper type, and press the desired paper type button.
For e-STUDIO2330C/2820C/2830C/3520C/3530C/4520C
You can select either [RECYCLED PAPER], [THICK1], [THICK2], or [THICK3] for the paper type.
28 Setting Drawer