2.SETTING ITEMS (ADMIN)
Setting EAP-TLS
The CA certificate and user certificate must be installed in this equipment before performing settings for IEEE 802.1X
authentication. For instructions on how to install the certificates, refer to the TopAccess Guide.
1
Select [EAP-TLS] and press [Next].
The WIRED 802.1X SETTINGS (EAP-TLS) screen is displayed.
2
The user certificate installed in this equipment is displayed. Confirm the certificate and
press [Next].
3
Confirm the settings and press [APPLY NOW].
The "NETWORK INITIALIZING" message is displayed and this equipment starts initializing the network interface
card to apply the changes.
2 SETTING ITEMS (ADMIN)
IEEE 802.1X Authentication Setting
135