Table of Contents
Advertisement
2.SETTING ITEMS (ADMIN)
3
Specify the following items as required and press [OK].
ENABLE HTTP SERVER — Press [ENABLE] to enable the HTTP network server service, or [DISABLE] to disable
the HTTP network server service. This option must be enabled for TopAccess and the e-Filing web utility.
[PRIMARY PORT NUMBER] — Press this button to enter the primary port number to be used for HTTP access
from the other client. It is recommended that you use the default port number "80" if you are not sure about
changing this port number.
[SECONDARY PORT NUMBER] — Press this button to enter the secondary port number to be used to access
TopAccess and the e-Filing web utility. It is recommended that you use the default port number "8080" if you are not
sure about changing this port number.
ENABLE SSL — Press [ENABLE] to enable the SSL for accessing TopAccess and the e-Filing web utility, or
[DISABLE] to disable the SSL for accessing TopAccess and the e-Filing web utility. When this option is enabled,
the data transferred between the equipment and client computers will be encrypted using a private key when
operating TopAccess and the e-Filing web utility.
To enable SSL, you must create a self-signed certificate in the equipment or import a server certificate using
TopAccess. If the self-signed certificate is not created or the server certificate is not imported, SSL cannot be
enabled.
4
Continue to another network setting if required, then press [APPLY NOW].
The "NETWORK INITIALIZING" message is displayed and this equipment starts initializing the network interface
card to apply the changes.
2 SETTING ITEMS (ADMIN)
Setting Network Functions
103
Advertisement
Table of Contents
