Table of Contents
Advertisement
2.SETTING ITEMS (ADMIN)
4
Specify the following items as required and press [OK].
DHCP (OPTIONS) — Select whether or not the optional information (IPv6 address for the DNS server, etc.), except
the IPv6 address for this equipment, which is issued from the DHCPv6 server, is used on this equipment. Press
[ENABLE] to use the information, or [DISABLE] not to use it.
[IP ADDRESS] — Press this button to assign the IPv6 address for this equipment.
[PREFIX] — Press this button to assign the prefix for the IPv6 address.
[GATEWAY] — Press this button to assign the default gateway.
In MANUAL mode, you cannot select the DHCP (IP Address) option.
When you press [IP ADDRESS], [PREFIX] or [GATEWAY], the on-screen keyboard is displayed. Enter the
value using the keyboard and digital keys, and press [OK] to set the entry.
5
Continue to another network setting if required, then press [APPLY NOW].
The "NETWORK INITIALIZING" message is displayed and this equipment starts initializing the network interface
card to apply the changes.
If Duplicate Address Detection (DAD) detects duplicate addresses, the message "IPv6 ADDRESS CONFLICT" is
displayed on the touch panel.
2 SETTING ITEMS (ADMIN)
Setting Network Functions
89
Advertisement
Table of Contents
