Table of Contents
Advertisement
2 SETTING ITEMS (ADMIN)
7
Continue to another network setting if required, then press [APPLY NOW].
The "NETWORK INITIALIZING" message is displayed and this equipment starts initializing the network interface
card to apply the changes.
If Duplicate Address Detection (DAD) detects duplicate addresses, the message "IPv6 ADDRESS CONFLICT" is
displayed on the touch panel.
Setting the IPv6 protocol automatically (in a stateful network environment)
1
Press [NETWORK] in the ADMIN menu.
The NETWORK menu is displayed.
To display the ADMIN menu, see the following page:
P.63 "Entering Admin Menu"
2
Press [IPv6].
The IPv6 screen is displayed.
92
Setting Network Functions
Advertisement
Table of Contents
