Table of Contents
Advertisement
2 SETTING ITEMS (ADMIN)
3
Select the server you want to check and press [PING] or [TRACEROUTE].
The check result is displayed.
When the ping function is performed, the check result "IP address 128 (TTL: Time to live) fixed OK/NG" is
displayed.
When the traceroute function is performed, the check result "IP address 1 to 128 (TTL: Time to live) OK/NG" is
displayed.
When the ping/traceroute command can reach a server, the IP address is displayed for the check result for the
server. If the command cannot reach it for some reason, the host name is displayed instead of the IP address.
There are two ways to select the server you want to check.
To select the desired server from the server list displayed on the touch panel:
Checkable servers and supported protocols are as follows.
-
Secondary DNS server (IPv4/IPv6)
-
Primary DNS server (IPv4/IPv6)
-
Primary WINS server (IPv4)
-
Secondary WINS server (IPv4)
-
SMTP server (IPv4/IPv6)
-
POP3 server (IPv4/IPv6)
-
Primary SNTP server (IPv4/IPv6)
112
Setting Network Functions
Advertisement
Table of Contents
