Table of Contents
Advertisement
2 SETTING ITEMS (ADMIN)
Setting the TCP/IP for static IP address
1
Press [STATIC] in the ADDRESS MODE option.
2
Specify the following items as required and complete the setting.
1) Press [IP ADDRESS] and enter the IP address of this device using the digital keys.
2) Enter the subnet mask and default gateway as required.
3) Press [OK].
You will be returned to the NETWORK menu.
3
Continue to another network setting if required, then press [APPLY NOW].
The "NETWORK INITIALIZING" message is displayed and this equipment starts initializing the network interface
card to apply the changes.
86
Setting Network Functions
Advertisement
Table of Contents
