Electrical Safety - Xerox Wide Format IJP 2000 User Manual

Electrical Safety

WAR NING
This product shall be operated by the power source as indicated on the product's data plate. Consult your
local power company to check if your power source meets the requirements.
WARNING: Connect this product to a protective earth circuit.
This product is supplied with a plug that has a protective earth pin. The plug fits only into an earthed
electrical outlet. This is a safety feature. If the plug doesn't fit to the outlet, contact an electrician to
replace the outlet to avoid risk of electric shock. Never use an earthed adapter plug to connect the product
to the electrical outlet that has no earth connection terminal.
Improper connection of a grounding conductor may cause electric shock.
Plug the power cord directly into a grounded electrical outlet. To prevent overheat and a fire accident, do
not use an extension cord, a multi-plug adaptor or a multiple connector. Consult your local Xerox
representative to check if an outlet is grounded.
Connect this product to a branch circuit or an outlet that has larger capacity than the rated ampere and
voltage of this product. See the data plate on the rear panel of this product for its rated ampere and
voltage.
Never touch the power cord with wet hands. It may cause electric shock.
Do not put an object on the power cord.
Always keep the plug connection free of dust. The dusty and damp environment may bring about minute
electric current in a connector. It may generate heat and eventually cause a fire accident.
To avoid the risk of electric shock and a fire accident, only use the power cord supplied with this product or
the ones designated by Xerox.
The power cord is exclusive use for this product. Do not use it for any other product.
Do not damage or alter the power cord. Damage and alteration may generate heat and eventually cause
electric shock or a fire accident.
If the power cord is damaged or insulated wires are exposed, contact your local Xerox representative for
its replacement. Do not use a damaged or uninsulated cord to avoid the risk of electric shock and a fire
accident.
Safety Notes
14