Replacing A Print Head - Xerox Wide Format IJP 2000 User Manual

3.1.4
When the amount of ink sprayed from the nozzle of a print head exceeds the specified value, the print head
replacement message appears on the touch screen.
On the touch screen, check the [Supplies] screen to see which print head needs to be replaced. The amount used of
ink at each print head can also be viewed in the [Supplies] screen.
For more information on the [Supplies] screen, refer to "1.9 Checking Consumables" (p. 49).

Refer
Print head needs to be replaced soon.

3
Steps
1.
Have a new print head ready.
2.
On the [System Administrator Menu] screen, press [Print Head Maintenance] > [Replacing Print Head].
Note
3.
Select the print head to be replaced.
Note
4.
Press [Start].
5.
Press [Yes].
3.1 Replacing Consumables
70

Replacing a Print Head

For information on how to display the [System Administrator Menu] screen, refer to "5.1 System

Administrator Menu Settings Overview" (p. 104).
If necessary, you can select multiple print heads. To

replace all of five print heads, select [All].