6.2
Notes and Restrictions
This section describes the notes and restrictions to observe when using the machine.
6.2.1
Notes and Restrictions on the Use of the Machine
Installing and Moving the Machine
When moving the machine to another location, contact your local Xerox representative.
When the machine is operating, protect it from shocks.
Do not place objects near the ventilation opening of the extractor fan of the machine.
Cautions when Operating the Machine
Do not leave the upper unit open for more than five minutes. This may result in deterioration of the image quality.
The machine will beep if you leave the unit open for more than five minutes.
Cautions when Switching Off
Do not turn off the power immediately after switching it on. Turning the power off before the Ready screen has
been displayed on the touch screen might result in damage to the system.
If the control panel freezes or an error screen stops responding, switch the power off.
When switching the power off and then on, make sure that the touch screen is turned off before you switch the
power back on.
6.2.2
Notes and Restrictions on the Use of the Print Feature
For notes and restrictions that apply to the print feature, also refer to the Help section of CentreWare Internet
Refer
Services.
Maximum Print Length
The maximum print length is 196.9 in. (5,000 mm) (78.7 in. (2,000 mm) for manual feed) regardless of the paper
type.
The machine operation and print results are not guaranteed if you select the type number [0] in [Detailed Set-
tings] and run a print job of 196.9 in. (5,000 mm) or longer.
For more information on the Details Settings, refer to "5.3.7 Detailed Settings" (p. 114).
Refer
6.2 Notes and Restrictions
6
131