Toshiba e-studio16 Operator's Manual page 37

17
Complete the field of each required
item.
G [IP Address]
Input the IP address of the printer.
G [Name]
Input the printer name you desire. The port
name is name input here.
G [Port]
In most cases, this does not need to be set.
Input the value obtained by adding 1 (one) to
the "Base Port Number" in the NetPanel "NIC
Configure - IP Configuration."
G [Description]
If necessary, input a comment about the printer.
18
Click on [Add].
G If an addition has been made by mistake, click
on the added printer then click on [Delete].
19
The printer is added to the [Available
Printers] list.
20
Click on [OK].
21
Click on [OK].
G The completion message is displayed.
22
Click on the [OK].
23
Next, installing the printer driver:
G For
installing
"INSTALLING THE PRINTER DRIVER for
Windows" on later pages.
SUPPLEMENTS:
G After the peer-to-peer utility for TCP/IP is installed, please continue the operation for
installing the printer driver.
G The "IP-P2P" program group and icon are added to the Start Menu. You can re-
configure using the program.
G If you make a change in the "Print Names" section, upon closing the program, it
prompts you to reboot the computer. Click on [OK] and restart your computer.
the printer driver, see
35