Toshiba e-studio16 Operator's Manual page 100

12
Select "Raw"
"Protocol".
G Raw: The default data type for clients other
than Windows 2000. When printing in
the Raw type, the entire process of
preparing the print job is done on the
client computer.
G LPR: Printing is done through the LPD service.
When printing in the LPR type, the
process of preparing the print job is done
on the print server.
G When "Raw" is selected, go to Step 13.
G When "LPR" is selected, go to Step 14.
13
Enter "10001" at "Port Number" and
check on "SNMP Status Enabled".
G "public" is automatically entered for the
"Community Name", and "1" is entered at the
"SNMP Device Index". Do not change them.
G Go to Step 15.
14
Enter "PORT1" for the "Queue Name"
and check
Enabled".
G "public" is automatically entered for the
"Community Name", and "1" is entered at the
"SNMP Device Index". Do not change them.
98
or "LPR" under
on "SNMP Status