Toshiba e-studio16 Operator's Manual page 226

Print Queue Scan Rate
Ethernet Frame Type
Disable Bindery
3
Enter the password.
G The password is displayed as asterisks " * ".
4
Click on [Accept Setting].
G Click on [Clear Inputs] if you want to cancel your changes and clear the input fields.
5
The entered settings are applied and the message "Update Successful" is
displayed.
6
The Network Interface Card is automatically restarted.
224
Set the print queue scan time interval for the print server, using a
range of 1 to 255 seconds. It is set to 1 second as the default
setting.
Select the preferred frame type you want to use when multiple
NetWare frame types are in use. For most situations, the default
setting is appropriate.
Check this only when using NetWare 4.x or 5.x in NDS mode.
Uncheck this when using NetWare 3.x, 4.x or 5.x in Bindery
mode.