Toshiba e-studio16 Operator's Manual page 185

➁
I/O Timeout
This sets the time interval that the printer will wait if a print job is interrupted. The Auto Continue setting determines
what to do with the interrupted print job.
NOTE: It is set to "45" as a factory default.
➂
Page Protection Mode
A data overrun may occur during the printing operation when there is a large amount print data on a page. The printer
can not process the data in time and therefore stops printing. In order to avoid data overrun errors, page protection
reserves additional memory for page processing and will wait until the page is fully composed before printing the
page.
G Auto
The printer analyzes each page and turns on page protection automatically only when it is required.
G On
The printer always keeps sufficient memory reserved to ensure that a page can be fully composed.
➃
Smoothing Mode
This allows the smoothing feature to be used when printing. (This only applies when printing is performed without the
printer driver.)
NOTE: It is set to "On" as a factory default.
➄
Toner Save Mode
This sets the toner save feature to be used when printing. This only applies when printing is performed without the
printer driver.
NOTE: It is set to "Off" as a factory default.
➅
Auto Continue Timeout
This sets the duration that the printer will attempt to self-recover from printer or print job errors.
NOTE: It is set to "15" as a factory default.
➆
Detect Paper Size
This detects the paper size error before printing unless the paper size in the tray is matched to the document size.
When this is set to OFF, the machine does not display the paper size error message and prints the document. When
this is set to ON, the machine displays the paper size error message before printing the document if it does not
match the paper size in the tray.
NOTE: It is set to "OFF" as a factory default.
➇
Resolution
This sets the resolution for printing.
NOTE: It is set at "600dpi" as a factory default.
G 600dpi
Select this to print documents with an emphasis on resolution over speed.
G 300dpi
Select this to print draft-like documents or documents with an emphasis on speed over resolution.
183