Toshiba e-studio16 Operator's Manual page 24

9
Scroll down to the bottom of the
page.
10
Enter a password and click on
[Accept Settings].
G The default password is "sysadm". The entered
password is described with asterisks " * ".
11
Complete the IP Address setting.
G The NIC will automatically restart. Please wait a
few minutes until the NIC status sheet is
printed. See the NIC status sheet to confirm the
IP address is assigned correctly.
G If the NIC status sheet is not printed, use the
ping command to confirm the IP address is
assigned correctly. Start the MS-DOS Prompt,
and at the command prompt enter "ping
xxx.xxx.xxx.xxx" ("xxx.xxx.xxx.xxx" is the IP
address that you assigned to the NIC). Repeat
this until the NIC replies.
22