Toshiba e-studio16 Operator's Manual page 186
For printer function print kit
Hide thumbs
Also See for e-studio16:
- Administrator's manual (134 pages) ,
- Operator's manual (126 pages) ,
- Specification sheet (14 pages)
Table of Contents
Advertisement
➈
Emulation Setting
Select the emulation to be used for printing.
NOTE: It is set with "Auto" as a factory default.
G Auto
The machine automatically chooses the emulation mode that is suited to the document to be printed.
G PCL
The machine always uses the PCL emulation when printing is performed without the printer driver.
G PS
The machine always uses the PS emulation when printing is performed without the printer driver.
➉
Print Postscript Error
Set this to print a PostScript Error Report when an error occurs during printing with the PS driver.
NOTE: It is set to "Off" as a factory default.
Device Password
11
The device password is required to save changes. The device password is automatically entered in the field.
[Change Now!]
12
Click on this to save changes.
184
Advertisement
Table of Contents
