Toshiba e-studio16 Operator's Manual page 26

8
Press the numeric key of the desired
frame type on the Dial Keypad.
G Some items are outside of the Message Display
Panel. Press
G The display returns to NETWARE menu after
selecting the frame type.
Press
G AUTO:
Press
G 802.3:
Press
G ETHERNET II: The network uses 802.3 frame
Press
G 802.3 SNAP: The network uses ETHERNET II
Press
SNAP.
G 802.2:
9
Press
G The display returns to the NETWORK menu.
10 Press
to select COMPLETE.
G If you want to cancel the Novell setting, press
.
24
to display the desired item.
to select AUTO.
The printer selects
appropriate frame
automatically. This is the factory
default.
to select 802.2.
The network uses 802.2 frame
type.
to select 802.3.
type.
to select ETHERNET II.
frame type.
to select ETHERNET
The network uses ETHERNET
SNAP frame type.
.
+ on the Dial Keypad
FRAME TYPE
1.AUTO
2.802.2
3.802.3
FRAME TYPE
3.802.3
4.ETHERNET II
5.ETHERNET SNAP
the
type
NETWARE
01.IPX/SPX
02.FRAME TYPE
NETWORK
01.COMPLETE
02.TCP/IP
03.NETWARE
Press two times.