Table of Contents
Advertisement
Web configurator
¤
Click
to save the changes.
Set
Activating VoIP status message
display
Display VoIP status messages on your
handset when there are VoIP connection
problems. These messages give you infor-
mation on the status of a connection and
contain a provider-specific status code
that helps the service team when they are
analysing the problem.
¤
Open the following Web page:
¢
Settings
Miscellaneous.
¤
Click the
Yes
option next to
status on handset
message display.
If you click No, no VoIP status messages
are displayed.
¤
Click
Set
to save the changes.
Please note:
A table with possible status codes and their
meaning can be found in the appendix on
page 121.
Copying the date/time from
time server
The date and time are shown in the idle
display of registered handsets. They are
important, for example, for stating the
correct time in the calls list and for the
"anniversary", "appointment" and "alarm
clock" functions.
There are two methods for updating the
time and date on your base station: man-
ually with one of the registered handsets
(page 12) or automatically by synchroni-
sation with a time server on the Internet.
Activate/deactivate synchronisation with a
time server as follows:
¤
Open the following Web page:
¢
Settings
Miscellaneous.
116
Show VoIP
to activate the status
¤
In the
Automatic adjustment of System
Time with Time Server
activate synchronisation between base
station and a time server. If you select
the base station will not adopt time
No
settings from a time server. In this case
you should set the time and date man-
ually using a handset.
¤
The
Last synchronisation with time server
field shows the last time when the base
station compared time and date set-
tings with a time server.
¤
In the
Time Server
net address or name of the time server
from which the base station should
adopt its time and date settings. The
time server "europe.pool.ntp.org" is set
as default on the base station. You can
overwrite the setting.
¤
From the
Country
in which your base station is being
operated.
¤
The
Time Zone
field shows the valid time
zone for the Country. It shows the devi-
ation between local time (not summer
time) and Greenwich Mean Time
(GMT).
If a country is divided into various time
zones, they will all appear in the list.
Select the appropriate
base station from the list.
¤
The
Automatically adjust clock to summer-
field will be displayed if
time changes
your time zone differentiates between
summer time and winter time.
Activate
if you want the time to
On
change automatically to summer time
or winter time when summer time
begins and ends respectively.
Activate
Off
if you do not want to
change to summer time.
Please note: If the date and time are
updated by a time server that automat-
ically switches between summer time
and standard time, you must always
activate
here.
Off
field select
to
Yes
field, enter the Inter-
list, select the country
for the
Time Zone
- Quick Links:
- The Base Station at a Glance
Hide quick links:
Advertisement
Table of Contents
