Siemens Gigaset S675IP User Manual page 122

The answer machine will not record a call or
interrupts the recording.
1. An error tone sounds and the display shows
Not possible!.
¥
You are making the call via a broadband
VoIP connection. A recording is not pos-
sible in this case. The attempt by the
base station to establish a non-broad-
band connection instead has failed
(rearranging the codec).
If necessary, you or the other caller must
change the setting for the codec used
(page 102).
2. The display shows
The answer machine's memory is full.
¥
Use a different handset to delete mes-
sages from the answer machine and
restart two-way recording.
Or:
¥
Finish the call, delete old messages from
the answer machine and re-establish
the connection.
Delete messages
VoIP status codes
If you have problems with your VoIP con-
nections, activate the
function (page 87, page 116). You will
then receive a VoIP status code that will
support you in problem analysis. Also
enter the code during problem analysis by
the Service department.
In the following tables you will find the
meanings of the most important status
codes and messages.
Status Meaning
code
0x300 The called party can be reached
under several phone numbers. If the
VoIP provider supports this, a list of
the phone numbers is transmitted as
well as the status code. The caller can
select to which number he wants to
make the connection.
0x301 Permanently redirected.
The called party can no longer be
reached under this number. The new
number is transmitted to the phone
together with the status code, and
the phone then no longer accesses
the old number but dials the new
address immediately.
0x302 Temporarily redirected.
The phone is informed that the called
party cannot be reached under the
number dialled. The duration of redi-
recting is time-limited. The phone is
also notified of the duration of redi-
recting.
0x305 The query is sent to a different "proxy
server", e.g. to balance out incoming
queries. The phone will make the
same query once again to another
proxy server. This is not a redirection
of the address per se.
0x380 Other service:
The query or the call could not be
made. But the phone is notified what
other options there are to be able to
connect the call.
0x400 Wrong call
0x401 Not authorised
Appendix
Show Stat. on HS
121