Icons; Example Of A Menu Input - Siemens Gigaset S675IP User Manual

Appendix
General specifications
Interfaces Fixed line network,
Ethernet
No. of channels 60 duplex channels
Radio frequency
range 1880 – 1900 MHz
Duplex method Time multiplex,
10 ms frame length
Channel grid 1728 kHz
Bit rate 1152 kbit/s
Modulation GFSK
Language code 32 kbit/s
Transmission 10 mW, average power
power per channel
Range up to 300 m outdoors,
up to 50 m indoors
Base station power
supply 230 V ~/50 Hz
Environmental +5°C to +45°C;
conditions in
20% to 75% relative
operation
humidity
Codecs G.711, G.726, G.729AB
with VAD/CNG, G.722
Quality of Service TOS, DiffServ
Protocols DECT, GAP, SIP, RTP, DHCP,
NAT Traversal (STUN),
HTTP

Icons

This section explains the meaning of cer-
tain icons and typographical conventions
that are used in this user guide.
/
Copy Entry Copy List
Select one of the two specified
menu functions.
~
Enter digits or letters.
The display keys' current func-
§Save§
tions are shown reverse high-
lighted in the bottom display
line. Press the display key
below to launch the function.
126
(example)
q
Press the control key at the top
or bottom: scroll up or down.
r
Press the control key on the
right or left: e.g. select setting.
c / Q / * etc.
Press the matching key on the
handset.

Example of a menu input

The steps you need to perform are shown
in abbreviated form in the user guide. This
is illustrated below using the example of
"Setting the contrast for the display". The
things you have to do are explained in the
boxes.
¢ ¢
v Ð
Display
¤
With the handset in idle status, press
on the right of the control key to open
the main menu.
¤
Use the control key to select the icon
Ð (Settings) – to do this, press up,
down, right and left q/r on the
control key until the icon has been
selected.
Settings appears in the display header.
¤
Press the display key
selection.
The submenu is displayed.
Settings
¤
Press up or down on the control key
repeatedly until the
tion is selected.
¤
Press the display key
selection.
Contrast Select and press
¤
Press down on the control key repeat-
edly until the Contrast
selected.
¤
Press the display key
of the control key to confirm your
selection.
to confirm the
§OK§
menu func-
Display
to confirm the
§OK§
.
§OK§
menu function is
or on the right
§OK§