Activating Voip Status Message Display - Siemens Gigaset S675 IP Manual

Setting the phone with the PC
Directory file content (vcf file)
The following data (if available) is written into the vcf file for entry into the
directory or transferred from a vcf file into the handset directory.
u
Name
u
First name
u
Number
u
Number (office)
u
Number (cell)
u
E-mail address
u
Date (YYYY-MM-DD) and time of the reminder call (HH:MM) separated by a
"T" (example: 2008-01-12T11:00).
u
Identification as VIP (X-SIEMENS-VIP:1)
Other information that a vCard may contain is not entered into the handset
directory.
Example for an entry in vCard format:
BEGIN:VCARD
VERSION:2.1
N:Smith;Anna
TEL;HOME:1234567890
TEL;WORK:0299123456
TEL;CELL:0175987654321
EMAIL:anna@smith.com
BDAY:2008-12-24T11:00
X-SIEMENS-VIP:1
END:VCARD

Activating VoIP status message display

You can display VoIP status messages on your handset when there are VoIP con-
nection problems. These messages give you information on the status of a con-
nection and contain a provider-specific status code that helps the service team
when they are analyzing the problem.
¤
Open the following Web page:
Area VoIP Status
¤
Select
play.
If you select No, no VoIP status messages are displayed.
¤
Select
Please note
This user guide contains a table with possible status codes and their defini-
£
tions,
186
Yes after Show VoIP status on handset
Set to save the changes.
Page 195.
¢
Settings Handsets.
to activate the status message dis-