Siemens Gigaset S675IP User Manual page 98

Status
The status of the connection will be
shown for VoIP connections:
registered
The connection is activated. The phone
has been successfully registered. You
can use the connection to make calls.
Disabled
The connection is deactivated. The
phone is not registering with the corre-
sponding account with the VoIP serv-
ice. You cannot use the connection to
make or receive calls.
Registration failed
Your phone was unable to register with
the VoIP service, e.g. because the VoIP
access data is incorrect or incomplete
or the phone is not connected to the
Internet. There is information about
this in the section "Questions and
answers" from page 118 onwards.
Active
You can use the option in the
umn to activate (
( ) VoIP connections. If a connection
is deactivated, the phone will not regis-
ter for this connection. The connection
can be activated/deactivated by clicking
directly on the option. The change does
not need to be saved.
To configure a connection or to change
the configuration of a connection:
¤
Click Edit next to the connection.
This will open a Web page where you can
make the settings needed. More in forma-
tion is available
u
in the section "Configuring the VoIP
connection" on page 97 and
u
in the section "Configuring the fixed
line connection" on page 101
/
Server not accessible
Active col-
) and deactivate
Configuring the VoIP connection
Open the Web page:
¤
Open the following Web page:
¢
Settings Telephony
¤
Click next to the VoIP connection
Edit
that you want to configure or the con-
figuration of which you want to
change.
This will open a Web page where you can
make the settings that your phone needs
to access your provider's VoIP server.
The Web page always displays the
following areas:
u
(page 97),
IP Connection
u
Personal Provider Data
The areas
u
General Provider Data
u
Network (page 99)
can be shown and hidden by clicking the
Show Advanced Settings
buttons.
Settings
You must enter the VoIP provider's general
access data in these areas. You can down-
load the general access data for many VoIP
providers from the Internet (page 101).
¤
Make the settings on the Web page.
¤
Save them in the phone, see page 100.
¤
Activate the connection if necessary,
see page 100.
Area: IP Connection
Connection Name or Number
Enter a name for the VoIP connection or
the VoIP phone number (max. 16 char-
acters). This name is used to display the
connection on the handset and the
Web configurator interface, e.g. during
allocation of send and receive numbers
(page 105), for the call display
(page 27).
Web configurator
¢
Connections.
(page 98).
(page 98) and
and
Hide Advanced
97