Activating Voip Status Message Display - Siemens Gigaset A580 IP User Manual

Directory file content (vcf file)
The following data (if available) is written into the vcf file for entry into the
directory or transferred from a vcf file into the handset directory.
Name
§§1§§
First name
§§2§§
Number
§§3§§
Number (office)
§§4§§
Number (mobile)
§§5§§
E-mail address
§§6§§
Date (YYYY-MM-DD) and time of the reminder call (HH:MM) separated by a
§§7§§
"T" (example: 2008-01-12T11:00).
Identification as VIP (X-SIEMENS-VIP:1)
§§8§§
Other information that a vCard may contain is not entered into the handset
directory.
Example for an entry in vCard format:
BEGIN:VCARD
VERSION:2.1
N:Smith;Anna
TEL;HOME:1234567890
TEL;WORK:0299123456
TEL;MOBILE:0175987654321
EMAIL:anna@smith.com
BDAY:2008-01-12T11:00
X-SIEMENS-VIP:1
END:VCARD

Activating VoIP status message display

You can display VoIP status messages on your handset when there are VoIP con-
nection problems. These messages give you information on the status of a con-
nection and contain a provider-specific status code that helps the service team
when they are analysing the problem.
¤
Open the following Web page:
Area VoIP Status
¤
Select
display.
If you select No, no VoIP status messages are displayed.
¤
Select
Please note
A table with possible status codes and their meaning can be found in the
appendix,
Yes next to Show VoIP status on handset
Set to save the changes.
£
Page 160.
Web configurator – Setting the phone using a PC
¢
Settings Handsets.
to activate the status message
151