Functions During A Call - Siemens Gigaset S675IP User Manual

Network services – VoIP
Activating/deactivating call waiting
Precondition: Your phone will permit two
parallel VoIP connections (s.
on page 102).
call only
If call waiting is activated, a caller on one
of your VoIP connections will hear the
ringing tone if you are already on a call
using this VoIP connection. This call is
announced acoustically and visually on
your handset screen.
Calls on the fixed line connection are not
signalled as call waiting. They are sig-
nalled on other registered handsets to
which the fixed line number has been allo-
cated as a receive number. If no other
handset is available, the caller will hear
the busy tone.
Accepting/rejecting a waiting call, see
page 36.
¢ ¢ ¢
v ê
VoIP
Status: Activate/deactivate.
¤
Press the display key
Please note:
The setting applies to all VoIP phone numbers.
It does not affect the procedure for call waiting
on the fixed line connection. For how to acti-
vate/deactivate call waiting for the fixed line
connection, see page 34.

Functions during a call

Precondition: Your phone will permit two
parallel VoIP connections (see
on page 102).
call only
Consultation call
During a call:
Press the display key.
§Ext.Call§
~ c
Enter the number or copy
from the directory and briefly
press/press and hold the
talk key c.
The number must be dialled via VoIP.
36
Allow 1 VoIP
Call Waiting
.
§Save§
Allow 1 VoIP
.
Please note:
After a few seconds, the number selected for a
consultation call is saved in the last number
redial list.
If the participant answers, you have the
following options:
u
Toggling:
¤
Use q to toggle between the par-
ticipants.
¤
End call with active participant:
End Active
§Options§
u
Conference call:
¤
Call both participants: press the dis-
play key .
§Conf.§
¤
End the conference call (toggling):
press display key
¤
End call with both participants:
press the end call key a.
u
Forwarding (provider dependent):
Precondition: You are toggling calls
and you phoned the currently active
participant yourself.
¤
To connect the two external partici-
pants:
Call Transfer
§Options§
If call forwarding was successful, a
message will appear to this effect. The
handset will then switch to idle.
Accepting a waiting call
Precondition: Call waiting is activated
(page 36).
Press the display key.
§Accept§
You have the option of toggling or holding
a conference call.
Please note:
– If the first call was an internal call, the inter-
nal connection is ended.
– An internal call waiting is shown on the dis-
play. You can neither accept the internal
call nor reject it.
Call.
.
§EndConf§