Setting Cursors - JRC JMA-2353 Instruction Manual

2.10.2 SETTING CURSORS

This function enables the setting of detail information about cursor display.
 "Cursor" operations
1 Open Marker
"Cursor" menu appears.
 Cursor Length
Sets the length of the cross cursor mark on the radar display.
1 Open Cursor
Short : Cuts the cross cursor mark in length.
Long
 Cursor Pattern
Selects the type of the cross cursor mark on the radar display.
1 Open Cursor
- Cursor .
- Cursor Length .
: Makes the cross cursor mark twice as long as when "Short" is selected.
- Cursor Pattern .
Chapter 2 OPERATIONS
2.10 MARKER SETTING
2-83
2