Setting The Azimuth Mode - JRC JMR-7230-S Instruction Manual

Setting items
[Process Off] Sets the image processing function to Off.
[3 Scan CORREL] Use when the rain/snow clutter images are heavy.
[4 Scan CORREL] Use when enhancing the target while suppressing sea clutter images.
[5 Scan CORREL] Use when detecting small targets in sea clutter images.
[Remain] Use when own ship is rolling severely.
[Peak Hold] Use for detection of small targets of low detection probability.
5.4.5

Setting the azimuth mode

Set the bearing for the radar video to be displayed on the radar display.
1
Click on the Azimuth mode combo box in Presentation and mode information.
2
Select the Azimuth mode.
Note
Available combinations vary depending on the settings of the azimuth mode and the
motion mode (refer to "5.4.6 Setting a motion mode".).
Azimuth mode
Motion mode
TM
RM(T) or RM(R)
Effects and recommended use conditions
N UP H UP C UP

 
  
5-23
Azimuth Mode combo
box
W UP C UP
(Angle Setting)


 
Section 5 Basic Operation of the Radar
1
2
3
4
5
5
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
APP A
APP B
1