Using Lines - JRC JMA-2353 Instruction Manual

Soft key 4: Off
You can use the [ENT] key to create/delete/move the marks.
"Enter":
"Erase":
"Move":

2.7.18 USING LINES

Lines can be indicated at arbitrary positions on the screen.
Reference:
 Bearing signal input and latitude/longitude data input are required to use lines.
 Up to 200 lines/marks can be displayed for lines, marks and event marks in total.
 This function is initially set to off. To use this function, set this to on by referring to "■
Soft Key Menu Setting" in "4.10 Control" of the Installation Manual.
1 Select
The "Line" soft key display appears.
2 Operate with the soft keys.
Soft key 1: ――
The line type of a target is changed.
Soft key 2: Not available
Soft key 3: Delete
Press to delete the lines of selected type.
Hold down to delete all lines.
The confirmation dialog window is displayed.
Enter Erase
Press the [ENT] key to create a mark at the cursor position.
Press the [ENT] key to delete a mark at the cursor position.
Use the cursor to select the mark to be moved and press the [ENT]
key. Then move the cursor to select the new position and press the
[ENT] key to place the mark.
Line on the soft key menu.
"Line" is color-inverted.
- - - -
－－－－
Chapter 2 OPERATIONS
2.7 SOFT KEY OPERATION
Move
2
2-67